Rode NTG5 現場錄音套件

NTG5 是一款短小、超輕的槍式話筒，非常適合於要求最嚴苛的錄音應用。結合嚴格控制的頻率響應、平滑的離軸響應和極低的自有噪聲（僅 10 A 聲級分貝）， NTG5 在各種應用中的音效十分引人入勝，尤其是在需要極佳音效的現場錄音和嚴苛的電影拍攝場景中。\n\n革命性聲學設計，可實現無與倫比的聲學明晰度和自然、純正的聲效。\n重量極輕（僅 76 克），長度短（僅 203 毫米）\n嚴格控制的頻率響應和非常低的自有噪聲\n高指向性的超心形拾音模式\n射頻偏置技術和保形塗層可確保在惡劣環境條件下的優越性能\n同時配有全套的現場錄音套件以及 WS10 防風罩、PG2-R 手槍式握把等配件

售價

HK$ 3890

推廣贈品 ~ 天祥精美鏡頭布 30x30cm

送天祥精美鏡頭布 30x30cm香港行貨 1件

追踪

詳情

oustic Design

The NTG5 features a revolutionary acoustic design unlike any other shotgun microphone. Circular acoustic perforations are utilised in place of linear slots, delivering greater acoustic transparency and a natural, uncoloured sound for superb performance in a wide variety of recording applications.

A Boom Operator’s Dream

The NTG5 features a short, super-lightweight aluminium body (just 76g!), making it one of the most compact professional shotgun mics available – a dream for boom operators who find themselves on long shoots, or filmmakers and sound recordists looking for a more portable and lightweight rig that delivers spectacular, broadcast-grade audio.

The Perfect Location Recording Mic

With a tightly controlled frequency response, low self-noise, highly directional supercardioid polar pattern, and smooth off-axis response, the NTG5 sounds spectacular in a wide variety of applications. It also boasts RF-bias technology and conformal coating on the electronics, which protect the microphone from moisture and humidity and ensure it is incredibly reliable even iin harsh environmental conditions. The NTG5 is the perfect mic for location recording and demanding filmmaking scenarios where superlative audio is imperative. No excuses.

Sound recordist wearing NTH-100 pointing NTG5 at helicopter

Specifications

Acoustic & Electrical Specifications

Acoustic Principle

RF-bias condenser

Active Electronics

RF-bias demodulation

Polar Pattern

Supercardioid shotgun

Frequency Response

20 Hz - 20 kHz

Frequency Response

80 Hz - 20 kHz ±3 dB

Output Impedance

25 Ω

Signal-to-Noise Ratio

84 dB

Equivalent Noise

10 dB SPL (A-weighted, as per IEC651)

Input SPL @ 1% THD

130 dB SPL (1kHz @ 1% THD, 600 Ω load)

Power Requirements

2 mA @ 48V phantom power

Sensitivity

-23.5 dB re. 1 Volt/Pascal or Better (66 mV @ 94 dB SPL @ 1 kHz)

Mechanical Specifications

Weight (g)

NTG5: 76

PG2-R: 224

Dimensions (mm)

NTG5: 203 (H) x 19 (W) x 19 (D)

PG2-R: 240 (H) x 60 (W) x 117 (D)

Box Contains

1 x NTG5

1 x WS10

1 x ZP1

1 x PG2R

1 x PG2-R Pro Cable

即將推出!

搜尋記錄

熱門推薦